Battery Protector (Low Voltage Disconnect)
for 12V Lead Acid batteries. 10A max.
To protect batteries against over discharging.
This product is perfect for DIY projects where limited space and low current consumption required.
- Adjustable threshold levels for Cut-Off and Reconnect.
- Remote Forced ON/OFF pins.
- Solid state switch (single n-ch MOSFET on positive side)
- Draws only 0.08 mA when OFF and 1.5 mA when ON state!!!
- Small size 20 x 42 x 9 mm
- Wide 2 mm in diameter soldering terminals – you can solder any type of connector you wish.
- True short circuit protection: YES
- Over-current protection: YES
- Reverse voltage protection: YES
- Oscillation free operation: YES (1-2 secs delay in low voltage detection)
Here you can view a comparison table (as PDF doc.) for all actual models.